"I changed my impeller not too
"I changed my impeller not too long ago but never tested to see that it actually sucks water. The engine has always ran at about 190 since I got it? What is the normal operating temp?
I just checked for suction and got nothing really. Then I disconnected the hose in the engine comp to bipass the leg (I searched and found the leg could be the problem) so that I could narrow down the problem.
Still no suction. I filled a bucket of water and ran a hose into it, but at idle, at best it is spitting out mist. How much should this be sucking up at 1000 RPM? When I rev it harder it still doesnt really suck up that much... I can't seem to figure out what the problem is, I pulled the impeller again to make sure it is in a clockwise direction, and I pressured the system from the impeller intake and there wasn't one leak. All the water going in went out the leg exhaust.
Thanks!!"
"I changed my impeller not too long ago but never tested to see that it actually sucks water. The engine has always ran at about 190 since I got it? What is the normal operating temp?
I just checked for suction and got nothing really. Then I disconnected the hose in the engine comp to bipass the leg (I searched and found the leg could be the problem) so that I could narrow down the problem.
Still no suction. I filled a bucket of water and ran a hose into it, but at idle, at best it is spitting out mist. How much should this be sucking up at 1000 RPM? When I rev it harder it still doesnt really suck up that much... I can't seem to figure out what the problem is, I pulled the impeller again to make sure it is in a clockwise direction, and I pressured the system from the impeller intake and there wasn't one leak. All the water going in went out the leg exhaust.
Thanks!!"