Logo

Motor wonbt start

"I have a 1986 tollycraft with

"I have a 1986 tollycraft with 2 1997 fuel injected 454 engines.When i was getting it ready from being stored for the winter i changed the cap, rotor and wires on both. When doing the wires, one by one on the starbourd engine 2 of the wires got loose and I think the were crossed,. on the intake manifold i read the firing orders as 1 8 4 3 6 5 7 2 . The manifold also has the plug numbers stamped on it too. So i traced all the wires to the plugs. Everything looks good. No start. I removed the primary fuel filter and it looked great.still no start. The engine turns over good. The motors ran fine when she was put away for the winter. As i said the port engine runs fine, so I think the fuel is ok and I see a direct line to the this engine to the fuel tank with the shut off in the open position.What next?"
 
did you follow the firing orde

did you follow the firing order cast on the intake for the stb motor ?cause the stb motor is ussualy reverse rotation and must be wired acordingly or it wont run.
 
Back
Top