Mercury Pro XS 150

[texasjavelina7]

Have a brand-new Mercury 150 Pro XS with installed Vessel View. Was curious if anyone would be worried about water and oil temp or have seen this before etc. Boat/Motor was operated in Port Aransas Texas where water temp is roughly 60F and outside air was 70F. Showing water temp @32F and oil @ -6F. Only had boat out 3 times. Same temperatures on every trip. Thanks for your help.

 

[AllDodge]

VV was not programed correctly
If VV was installed by a dealer then take it back to them
If VV was installed by you, go into setup and adjust

 

[texasjavelina7]

Got it. I installed so will do some research on how to adjust. Thank you for the information.