Logo
FULL SITE MENU

mariner 80 carp set

D

drakensberg

New member
hi ppl
im new so dont know how it works ,but if any 1 can help me to an link or somthing to help me set my carps of the mariner.
i get feul to the carps but then it stops .
the motor dont want to start and i realy want to fix the problem
any 1 what can help me please
thanks
dragensberg
 
Is this a 3 Cylinder Model. When did it run last. There are no carb settings as per other than low speed and that will not help in your case. You can clean the carbs, replace the needles and floats(they are plastic and can become porous and saturated with fuel with age) I would remove the front cover tilt the motor all the way down and spray some fuel in the top carb to see if you can get it to start. Is this still oil injected or bypassed. When it starts keep the rpm below 2000 with that front cover off. DO NOT USE ETHER or QUICK START under any conditions.

dumb things, but Make sure the vent is open on your tank and make sure you do not have an air-lock in your fuel line. If you have a sticky needle in the carbs they can be a bear to get fuel into. I would really suggest having the carbs cleaned professionally.

provide some more details please.
 
Back
Top