Logo
FULL SITE MENU

Manual trim lever Johnson 85

B

bluefan89

New member
Hello

I have a 1977 glastron with a Johnson 85 on it. Looks like the manual trim lever has been broken, it is missing. Does anyone know how hard or expensive that a power trim would be if even possible?

Also does anyone know where to find a manual lever? Not sure of the model on boat but assume it is original with boat. (I know there are 3 model 85's that year)

Thanks

Will try to add a picture or two later
 
boat trim.jpg
 
Isn't there a model number plate on that engine's port transom bracket..... how about a round core plug on the block with the numbers?.... Usually under that coil mounting bracket, top port, near the head gasket.
 
Exactly how much of that manual tilt release assembly do you need? There's quite a bit to it.... the lever of course with the bushing, handle knob, clevis on the other end of the lever.

Then there is the linkage down to the hook apparatus that grabs the tilt adjust lock rod, plus the springs... you can see that simply installing the lever (I have a few left) and missing other parts would be a waste. Let me know.
 
Back
Top