Lower Bearing Set Screw A.K.A. Retaining Screw (324852)

[FishAtFive]

Hello,

I accidentally removed the screw at B and spun the prop while doing a lower gear oil change. Gear oil came out of the hole. I realize I was not supposed to do that so i have been scouring the manual and can not find what this screw is for or if I need to do anything special before reinstalling it. Any help is appreciated. Thanks for the help.

 

[racerone]

Clean oil out of the hole.----Little bit of sealer on the screw.---Install at 40 INCH-LBS.----Done.----No damage was done.

 

[FishAtFive]

Thanks for the good news and how to put it back together. Most appreciated!