Johnson LD10S 5hp

[magnum7269]

"I took the lower unit off to

"I took the lower unit off to check the impeller and some of the parts fell off from up near the engine before I could see where they went exactly. I'm a bit of a noob with this engine, so if anyone could tell me if i've got this in the right order I would appreciate it.

Parts Loose...
Image - http://razor-custom.com/misc/engineparts1.jpg"

Hopefully The Right Order...
Image - http://razor-custom.com/misc/engineparts2.jpg"

And if someone could give me a spark plug brand and number to replace the old ones (not sure if the ones in it are even for it) that would be great, Thanks again

"

 

[bankerjohn]

"On-line diagrams only go back

"On-line diagrams only go back to 1968 ... yours is a 1965 ... right?

You can check out this diagram for a 1968 5hp Johnson ... maybe it will help:

http://i267.photobucket.com/albums/ii286/bankerjohn/1968Johnson5hpgearcase.jpg"

As for the spark plugs ... Champion J6C, gapped to .030""

 

[magnum7269]

"yea, that image looks very si

"yea, that image looks very similar to the engine i have, thank you again for the reply."

 

[magnum7269]

"Took this little engine out t

"Took this little engine out to try it and to see if it was worth investing much into, ran pretty good only thing i saw was what looks to be a small amount of oil coming out from under the flywheel. Figure maybe an oil seal may be leaking or something. any tips on checking/changing this would be greatly appreciated. Also since the johnson parts catalog only seems to go back to 68, would most of the parts like the oil seal etc. match from the LD-13B model on the LD-10S model? Thanks again."

 

[joereeves]

"Adam, you have them in the pr

"Adam, you have them in the proper order.

Thousands of parts in my remaining stock. Not able to list them all. Let me know what you need and I'll look it up for you. Visit my eBay store at:

http://stores.ebay.com/Evinrude-Johnson-Outboard-Parts-etc?refid=store"

 

[magnum7269]

"Thanks for your reply, what d

"Thanks for your reply, what do you think about the small oil leak under the flywheel? Maybe an oil seal leaking? If so will probably need one of those for our model LD-10S (mainly why I was asking about the LD-13B model matching) also wandering how hard it is to change and how to go about it. Thanks again."