Logo

Johnson 55 hp compression

would any one know what compre

would any one know what compression to expect on my 5.5 hp johnson cd19s 341361 i am geting 85psi on each cyl for 5 pulls dont know if this is the right method any help would b appreciated also would anyone know if this engine is 25 to 1 fuel to oil ratio
 
vics would you happen to know

vics would you happen to know the amount of turns out for the lean and rich adjustment on this motor thanks for your previous reply(the both cyl are the same) this motor will run for short period and quit then will not start for some time
 
"Joe Reeves carb needle adjust

"Joe Reeves carb needle adjustments instructions can be found HERE I think the initial settings he gives will apply but I believe on older engines they may be less.

I'd be checking the ignition system to make sure there are good sparks, condition of coils, plugs etc and fuel system to ensure flow of fuel (tank vent etc) even for the possibility of the float valve not closing and allowing flooding."
 
Back
Top