Logo
FULL SITE MENU

Johnson 25 hp help!!!!!!

G

goosemasterkl

Member
I'm new to this forum and was wondering if someone could help me find an IPL on a 1999 Johnson 25 hp outboard motor? The model number is J25R99E, serial no. G 04787593. I can't find anything to show me a parts diagram on this engine. I'm trying to find a carburetor and it's part# so I can see about picking one up. Thanks in advance to anyone who replies. Thanks
 
Pictures of the motor ?----Picture of the model # sticker?-----Something seems odd with it.----Read the model # again.-----Carburetors are easy to repair and service.----Why do you feel it needs a new one.-----
 
It's a friend of mines friend that has the motor. I wrote down the numbers that was on the back of the shaft housing that's underneath the engine compartment. The numbers I got off the carburetor is HY 432700 that's on top and on the bottom of the carburetor on the fuel bowl is 330503
Is there new part numbers that supersede these? Thanks
 
That's the numbers that was on the motor. I thought the 99 in the model# was that it was a 1999. According to the chart I was looking at on a marine parts website. The model# is J25R99E.
 
It does not add up !!----Post a picture of this motor or the model # sticker.-----It is the only way to resolve this.-----Had a fellow ask me to repair his 1979 model 25 HP Johnson a few years ago.-----Showed up with the motor and I immediately told him it was NOT a 79.------He had seen a 79 in the serial # .----The motor was in fact a 1992 model.----The misconception on the year of motor is never going away it seems.
 
Thanks, we'll be looking for the pix.
The OMC plant at Calhoun Georgia closed down on Christmas Eve 2000, so a 1999 motor would be possible. But that just isn't a model format for the 1990's (???)
 
Here are the pictures. I finally figured out how to upload them I think.

20230625_145838_resized[2561].jpg


20230625_145949_resized[2559].jpg


20230625_150922_resized[2560].jpg
 
I meant to ask someone; The last picture I posted of the top of the carburetor. Do you have to remove those lead shots when cleaning/rebuilding the carburetor? There's one on each side of the welch plug and another one on the side. Just wondering and if so; how do you go about removing them and installing them? Thanks again everyone.
 
These are what I'm referring to. Do these need to be removed for cleaning and rebuilding the carburetor? If so' how do you remove them and install them? Thanks

Inked20230625_150922_resized[2560].jpg
 
Back
Top