Logo
FULL SITE MENU

Johnson 125 not peeing

C

cessna6161

New member
"I have a 1995 Johnson 150 &#4

"I have a 1995 Johnson 150 (J150GLEOM), runs fine, but I was in sand and it took me about a half hour to get out. When I did, it was over-heating. I bought a new water pump, but when I took off the lower unit, I saw if had a lot of sand in it, as well as the "pee" hole on top of the engine was stuffed with sand. I flushed it from the bottom and from the top and put the old water pump back in. Nothing coming out of the pee hole. I put the new water pump in, twice, and still have no apparent pumping. Any suggestions that could get me back in the water? Thanks."
 
"Rout the pee hole out with we

"Rout the pee hole out with weed eater string.
Make sure that when you put the lower unit back up, the water tube aligned with and entered the top of the water pump outlet.
Two common issues with your problem."
 
"Thanks for the suggestions, b

"Thanks for the suggestions, but I've removed the fitting that the pee hole is in and still get nothing, and the last time I installed it I was pretty carefull to make sure the tube was aligned. Any other ideas? I will try flushing it all again. Thanks."
 
"u also,need to pull the therm

"u also,need to pull the thermostats,and backflush..... so...what about the 125 ????????"
 
"Well...if it was that packed

"Well...if it was that packed with sand, how about the water tube itself?
Is it clear?"
 
Back
Top