IN HIGH RPM DOESN%c2%b4T WORK

[carcep]

"Good Morning, my name is Carl

"Good Morning, my name is Carlos Cepeda

I have a Johnson outboard 33hp year 1966

After maintenance and 12 hours of test its works normally, then it lost all power in high RPM.

When I put the first gear in low RPM it works normally, but when I demand power with acceleration, it doesn’t work and It feels the same like if it was in neutral position…….

In low RPM it works, but in high its in neutral position

What is the problem?"

 

[scott_s]

check your propeller. sounds l

check your propeller. sounds like a slipping hub.

 

[carcep]

"yes, the propeller inside hav

"yes, the propeller inside have a piece of rubber joint with pression the propeller and a piece of copper, the piece of copper with the end of transmition, when the rubber lost its caracteristicas the joint between the propeler and the trasnmition lost too.

the solution for this problem is joint directly the propeller with the piece of coppper with many pins.

I tell you next week if the pins works."