Logo
FULL SITE MENU

I'm back with me 1985 3.0

W

wizard

Regular Contributor
Hello all

After sometime away from my boat ( 2 years almost ) I can get it out this year. I had heard alot about Sea Foam. I am told it's great stuff. So this is what I think I can do with this. First put some in gas tank. 2nd Change oil put some in oil ( should I put it in oil run engine for a bit then change oil ? ) 3rd after boat is ready to go find some place for vacume on engine and put some in there with engine running shut off for 30 min or so start engin take for ride .

I changed the oil before I parked the boat and put new oil in the drive. and I will change the drive oil again before I use the boat.

If this is how you do it great if not please let me know.

Thanks
 
Seafoam is great, but I would just change the oil and filter. Get as much old gas out as you can before attempting to start. Fill with premium gas and do all of your annual maintenance same as is recommended every year including new filters and lubricants. Cheap and easy the way to go here. Seafoam is great for decarboning after a lot of idling or trolling.
 
Last edited:
Back
Top