How to set up choke

[AC505]

" I have a 350 Chevy in my &#3

" I have a 350 Chevy in my '90 Mastercraft. As with most on this board I am used to fuel injection on my car and have a carb on the boat, what I don't like is that it takes 3-4 mins to warm up to a point that if I let it idle it won't stall. This isn't a big problem but I'm sure if the choke was adjusted correctly I would reduce the problem slightly. This leads me on to my question, cab anybody provide a brief how to on adjusting the choke? Carb is a Holley 4 barrel. "

 

[daniamarine]

"There are 3 screws and a reta

"There are 3 screws and a retaining ring around the choke cover. Loosen the screws and turn cover until the pressure from the bimetal spring just closes the choke plate with just a little pressure(cold engine). Make final adjustment with warmed up engine if choke plate does not open all the way when at operating temperature.
If you are in need of any parts or information you may contact us at 954-927-2999 or email at [email protected]
Thank you, Gabriel Acher - Dania Marine Corp."