How to remove tilt motor relays 270 drive, they look glued on

[dennis461]

http://i.ebayimg.com/00/s/NDgwWDY0MA==/z/JvEAAMXQfvlSgUGp/$_35.JPG

Before I make a bad situation worse, how do you get the relays off.
It's the older style, they look like they have been glued on with a cocoon.
The top cover is already off.

 

[RicardoMarine]

I"d replace that stuff with the black plastic relay housing, and the later style relays and micro-switch.

 

[dennis461]

I'm pretty sure that cannot be done.
The newer style aluminum top has a ridge and an o-ring The ridge catches the nuts from the two plastic housing screws.
That keeps the box from lifting off when drive is fully lowered.
When it lifts off, the drive keep gong and beaks the aluminum top (my situation)
The older style aluminum top does not have a ridge.

My plan is to move everything except the limit switch to a transom mounted relay box. This old style is lower and interferes with the steering.