Logo

Help on running

Just got the kits in today,I'm sure it's fuel delivery,I've got spark and compression,bought a new fuel tank and primer also,it's was running good,but got it to the lake and it would fire for a minute and just die right out,but I noticed if I hold the choke in it idled fairly decent
 
18-7222 made by Sierra.... I finally was able to take one of the carburetors apart today. When I took off the float bowl, I noticed that the float was level straight across the carburetor and I checked the drop on the float, and it was three quarters of an inch.So I installed the new float and measured it the exact same as the other one with a 3/4 drop,but when I turn the carb right side up the float is not level any more,but the drop is 3/4 is that normal?
 
Back
Top