contender31
Regular Contributor
Well I went against my better judegement and hired a mechanic to install a new fuel pump in my 454. After 4 hrs of trying to attempt to install the pump he got the push rod stuck got frustrated and left. It is seized in place with about 1/2 " of rod sticking out. The rod will not turn or move even with a set of pliers turning or tuggin on it. I tried to crank the motor to free up the cam but still siezed. Whoever designed this setup must of been drunk there is very little room to grab the rod end. Whe I turn over the engine I heare a clicking sound - any idea how to get the rod out and what the clicking noise is? FYI the rod does not move when turning over the engine.
Thanks in advance for your help
Thanks in advance for your help