Force 120hp engine reed valve block

[venxxxxx]

My jet boat punched a hole in the engine reed valve block. The piston rod on the last cylinder came loose and did that. My question is could I just patch it up with industrial epoxy with metal fillings ? Because this part does not get pressurized, just air/fuel mixture chamber.

Or anyone with similar fixes ?

 

[Jerryjerry05]

It would not last.It gets hot and cold and hot and cold .Expanding and contracting.It would work for a bit then let loose.
Then it would start sucking air.
Those parts are available on e-bay.
Unless you can get someone to weld it.J