Flush port - part number needed

[freeportd]

I have a BF30 2001 short shaft. I need the part number for the bolt that goes into the flush port. I have the flushing apparatus - but doesn't work well on the water!!

I know it's a M8 with a 1.25 pitch thread. If someone could tell me how long the bolt is (schematic would help but can't see it there...) - I could source one from the local hardware store maybe. Size of head would be important as well.

 

[hondadude]

The screw is an 8 x 8. It is the same bolt as the upper gear lube screw.

Part number 90105-ZV4-650.

Mike

 

[freeportd]

Thanks Mike. Did I miss it on one of the schematics?

 

[Tall Pine]

Not sure if you knew of this store/site but it has good parts diagram. Here is a link to your motor diagram. Click on the section you want to look at. BTW you have the same exact year and model I have and am getting ready for another season...Cheers!

http://www.boats.net/parts/search/Honda/Outboard%20Engine/2001/BF30A1%20SHA%20MARINE%20ENGINE%2C%20JPN%2C%20VIN%23%20BAWS-3210001%20TO%20BAWS-3219999/parts.html

 

[freeportd]

I know and utilize boats.net - but couldn't figure out what location to click and where in that location. Couldn't find it.

 

[hondadude]

It is not labeled flush port screw, it is labeled "oil check bolt"....at least on the official Honda parts diagram.

Mike