Float level

[mykc]

Hi , I am looking for the float level on a 1999 Johnson v4 130 S/N G 04785369

Regards Michael

 

[Boobie]

Got a model # ????

 

[mykc]

Model # J130PLSSS

 

[foxstan]

There is no float drop specification for this engine nor is there a float gauge available according to the service manual. "Instead the float should be level with the gasket surface (plus or minus 1/32" /0.8mm) with carburetor inverted. Initial low speed setting is 3.5 turns.

 

[foxstan]

Good catch kimcrwbr1, This applies to 130hp V-4, 90LV, 122cu.in. engines from 1996-2000 according to the manual.

There is no float drop specification for this engine nor is there a float gauge available according to the service manual. "Instead the float should be level with the gasket surface (plus or minus 1/32" /0.8mm) with carburetor inverted. Initial low speed setting is 3.5 turns.

 

[mykc]

Thanks guys