Logo
FULL SITE MENU

Firing problem

S

steve_dixon

New member
I have replaced coils on 5 and

I have replaced coils on 5 and 6. 5 is firing 6 is not. I can hold the wire in hand and there's nothing while turning the motor. Anyone have any suggestions? Thinking about the power pack.
 
"It would be nice to know what

"It would be nice to know what engine we're speaking of. However, usually the problem is the pack BUT before replacing that item, check all of the connections bewteen the timer base and the pack, and between ther pack and the coils.

Pins and sockets do become pushed back causing poor or no connection. Also wires have been known to break off from the pins/sockets but remain in the rubber plug gicing the impression that the wire IS connected when it is NOT."
 
Back
Top