Fritz Horton
New member
My Fireball 225 V8 is installed in a 1958 Century Arabian. It has two temperature sending units to the boat's two temperature gauges. One sender produces correct temperature readings and other does not read at all because it is not the correct sender for these gauges.
The “correct” sender has no manufacturer’s markings on it at all. Other than its appearance (see photo), its only distinguishing characteristic is an initial resistance reading of ~ 180 Ohms when the ambient air temperature is ~ 75 degrees F prior to engine start.
Any information leading to my locating and purchasing a “correct” sender would be appreciated!
Fritz
The “correct” sender has no manufacturer’s markings on it at all. Other than its appearance (see photo), its only distinguishing characteristic is an initial resistance reading of ~ 180 Ohms when the ambient air temperature is ~ 75 degrees F prior to engine start.
Any information leading to my locating and purchasing a “correct” sender would be appreciated!
Fritz