Hello all,
Wondering if anyone has had this issue. Went to start the boat up for the season and my FiQuench alarm is going off, and I am not getting a green light. Basically I turn on my battery switches, flip the two toggle switches and the green light goes on. Without those two toggles I don’t have power to the ignition, so I basically can’t start either motor. It would appear the fireboy is sensing a fire. Engines are Chrysler 360’s.
The red #10 wires on top above the relay are lettered A-D from left to right. With both toggles on (normal operation for starting, and now with the system in alarm) A and C have no power while D and B have 12v. I think these wires are what tie the system into the ignition, but not positive. I took each wire off one at a time and the alarm stays on while doing so. Thanks in advance!
Wondering if anyone has had this issue. Went to start the boat up for the season and my FiQuench alarm is going off, and I am not getting a green light. Basically I turn on my battery switches, flip the two toggle switches and the green light goes on. Without those two toggles I don’t have power to the ignition, so I basically can’t start either motor. It would appear the fireboy is sensing a fire. Engines are Chrysler 360’s.
The red #10 wires on top above the relay are lettered A-D from left to right. With both toggles on (normal operation for starting, and now with the system in alarm) A and C have no power while D and B have 12v. I think these wires are what tie the system into the ignition, but not positive. I took each wire off one at a time and the alarm stays on while doing so. Thanks in advance!
