Logo
FULL SITE MENU

Failed to Identify Johnson V4 Outboard G2260157

H

hesham_enan

New member
"It's a V4.. claimed to be

"It's a V4.. claimed to be 140HP and claimed to be 125HP.
Built late 80's or early 90's.. All I have is G2260157 embossed
on the block..

I can take pictures, but I don't know where to aim..

The previous owner claims model # J125WTPLW serial # A2260157 .. Unable to verify..

Speedy help would be appreciated.."
 
That model number would make i

That model number would make it a 1989 125hp commercial model
 
".. Thank you for fast reply..

".. Thank you for fast reply.. is there a way I can find the model number..? Also, I'm very curious how you got this info.. finlly, what does "commercial model" mean.."
 
"Take a look at the carbs. The

"Take a look at the carbs. They should have stickers with part numbers, compare those numbers with the BRP part catalog. Do the same for the power pack. That might give You more detailed info.
Model number should be on port side bracket."
 
.. the question remains.. why

.. the question remains.. why can I not get every detail about my engine just by the serial number.. seems simple..
 
"The serial number on a outboa

"The serial number on a outboard is like the engine number on a block of a auto engine.
Doesnt identify year, model etc. From a model number you decode model, year etc etc like vic decoded on your first post.

On the exhaust plate of your engine which is the plate between the cylinder heads, you should see that is is bulged not flat? the bulge is a pulse tuned exhaust system which is the 140hp power head"
 
"A tip:
When You find the par

"A tip:
When You find the part numbers, use the advanced search on the BRP site, 'where this part is used'.
To find details about Your engine: The simplest way is MODEL number, that is the way the system is made up. Serial number may only give an info if 'early'/ 'late' within the model number type."
 
"'On the exhaust plate of

"'On the exhaust plate of your engine which is the plate between the cylinder heads, you should see that is is bulged not flat? the bulge is a pulse tuned exhaust system which is the 140hp power head'

Not if a looper , they are all the 'same'."
 
"according to my service manua

"according to my service manual.
OMC Europe N.V
Pathoekeweg 120
8000 Brugge, Belgium
32-50-44-6611
P/N 507951 Service man (Exploded Veiw)
P/N 434250 5/91 PARTS mAN (Exploded Veiw)
MY ser # sj125wtplz
90 deg loop v "
 
Back
Top