Robert Spencer
New member
Hi,
I'm new to outboard repair so some of the terms used may be a bit obscure. The motor is old Modle No E15RLCNC
The motor starts and idles fine, however it has very little power through the throttle range and will splutter and stall if not backed off. It will run reasonably well at about 1/3 throttle. It's on a 12' aluminium boat so the power should be sufficient.
I'm new to outboard repair so some of the terms used may be a bit obscure. The motor is old Modle No E15RLCNC
The motor starts and idles fine, however it has very little power through the throttle range and will splutter and stall if not backed off. It will run reasonably well at about 1/3 throttle. It's on a 12' aluminium boat so the power should be sufficient.

