Logo
FULL SITE MENU

EVINRUDE 100HP WITH 3 BOOTON SHIFTER HELP

T

trucalling

New member
EVINRUDE 100 HP AND I HAVE THE

EVINRUDE 100 HP AND I HAVE THE 3 BOOTON ELECTRIC SHIFTER AND I JUST REWIRED THE WHOLE BOAT AND WHEN HIDDING THE WIRES I THINK I MAY HAVE STRAPED THE THROTLE CABLE TO TIGHT I THINK I STRAPED IT IN 3 PLACES KNOW WOULD THAT COUSE NOT TO GO FULL THROTLE WHILE IN GEAR AND I ALSO DIDNT PUT THE LITTLE PLASTIC PIECE OVER THE 3 BOOTONS ON THE SHIFTER PLEASE HELP
 
"HERE AS A PIX OF THE PLASTIC

"HERE AS A PIX OF THE PLASTIC PIECE THAT GOES OVER THE BOTTONS I THINK THAT IS JUST A SAFTY THING BUT I DONT KNOW
115728.jpg
PIX
 
"That plastic piece prevents o

"That plastic piece prevents one from shifting at anything but at idle. With it not installed, itt'ssible to shift at full throttle.... not a good idea!

If the throttle linkage moves at the engine when you apply throttle, the cable is not stuck/jammed, and the problem lies elsewhere such as clogged carburetors, sticking timer base, throttle cable not adjusted properly, etc.

Remove the carburetor face plate so that you can observe the throttle butterflies to see if they're opening fully.

http://stores.ebay.com/Evinrude-Johnson-Outboard-Parts-etc?refid=store"
 
OK THANKS ILL TRY THAT LAST WE

OK THANKS ILL TRY THAT LAST WEEK I TOOK IT OUT AND I HAD IT FULL THROTTLE FOR LIKE A 1/2 MILE AND IT WAS GOING PRETTY SLOW THEN ALL OF A SUDDEN IT JUST TOOK OFF AND WAS GOING FAST FOR LIKE A MILE AND A HALF THEN I EASED UP ON THE THROTTLE AND SLOWED DOWN THEN GAVE IT FULL THROTTLE AGAIN AND THE SAME THING IT TOOK LIKE 1/2 MILE THEN TOOK OFF BUT THIS TIME IT ONLY WENT LIKE 1/2 MILE AND THEN SLOWED DOWN ON ITS OWN
 
Back
Top