Logo
FULL SITE MENU

Engine fuel connector for '96 Honda 15hp

B

BP3526

New member
Can you PLEASE help me in finding a company or website or anyone that sells a Honda Fuel Line Engine connector that has the early style round locating pin (Not the new square type locating pin)? I have a 15hp Honda 4stroke outboard that is I believe is a 1996 model - the engine connector for the fuel line on this engine has that old round locating type pin (ie, both pins are round, the fuel pin AND the locate/lock pin). I have looked all over & can't find a vendor or store so far that sells this connector and I am stuck dead in the water without it. Thanks for any help!
 
I am not sure what you are looking for. But, Mercury and Yamaha connections worked (plugging the fuel line into the motor)for my 1993 Honda 15 hp motor. The one on the tank is a large round type connector.
 
I already have the round metal connector for the fuel-tank end of the gas ose - I am talking about the connector that attaches to the outboard motor - so are you saying that another brand of connector (not Honda) will fit properly on the 1996 Honda 15hp motor? I did not realize that other manufacturers use the same connector as the early honda's with the 2 round pins? Are you sure about this?
 
A Yamaha fitting will work ok but some have issues with making a good seal.

The suggested way is to replace the fitting on the engine with the updated rectangular stud type and change the fitting on your hose. There is a kit to do this.
Fuel connector set 04104-ZW9-000. It is not cheap, but if you make the change, you are good to go. The fitting on the engine is only one bolt. Just watch how the spacer and washer come off so you can replace it correctly.​

Mike​
 
Hi i have same problem i have a 15hp honda and tried a yamaha connector but it leaked i am still looking for a connector mines is a 1987 model if you get one let me know as i have tried 2 so far no joy

regards ian
 
Back
Top