Logo
FULL SITE MENU

Cooling pump impeller

W

wrrogers

Contributing Member
Looked on the Seira site for I

Looked on the Seira site for Impeller for VP AQ125A and was not sure of which one to purchase. Also purchased rebuild kit for raw water pump which came with two brass parts that the shaft rides on and was woundering if the old ones which are in the pump case at this time would have to be removed by a shop or if they may be removed by less technical means. Thanks for the help
 
"The impeller for the AQ125A s

"The impeller for the AQ125A should be 18-3075

and see application table on page 761.

I don't know about the raw water pump question you have asked, maybe someone else can help with that..."
 
can tap out the old bushings w

can tap out the old bushings with a socket or whatever fits.(if required) take care not to damage the new ones when installing.
 
Thanks for the info when addit

Thanks for the info when additional part comes in will attempt to remove the brass bushings.
 
Back
Top