Logo

Chrysler 318 dist rotor

dbatopsecret

New member
"FastJeff, I had a chance to t

"FastJeff, I had a chance to take the dist caps and rotors off and lube the shaft w/3-in-one and penetrating oil this weedend. I got my rpm's back on the starboard motor! Port motor has the problem I read from another poster where it dies under load about 20 min into the trip. Looks like the fuel pump issue I read in another thread.

On the rotor lube note, I also replaced all plugs on both motors, not wires as the new ones were were wrong type."
 
"Top:

On the port motor, di


"Top:

On the port motor, did you re-time it after fixing the advance stickiness? If not, it could be retarded since the advance wasn't coming all the way back (when someone timed it).

Jeff"
 
Back
Top