brainbuster

[walleyeslayer]

I have a 120hp johnson outboard motor 1989, I'm removing the lower unit. When I removed the linkage rods bolt to free the unit, I had to unplug some wires in the motor to get at it. All the wires are back together as they should be, but now I have no power. My question is, is there some sort of reset switch I'm missing, or fuse that could have blown? I need the power trim to work in order to get the unit the rest of the way off?

 

[joereeves]

Look at the smaller RED wires that are attached to the starter solenoid, follow those RED wires back to an in line fuse (main power fuse).

 

[walleyeslayer]

thanx joe for getting back to me and giving me somewhere to start.