DavidW2009
Regular Contributor
While R&R'ing my OMC Cobra outdrive (2.3L Ford), I read about something called "exhaust tubes".
IIRC, these take the place of the exhaust bellows. The exhaust then no longer flows thru the outdrive and the center of the prop, but exits at the pivot housing/bell housing.
Is this a good idea and will it work on a 2.3L?
IIRC, these take the place of the exhaust bellows. The exhaust then no longer flows thru the outdrive and the center of the prop, but exits at the pivot housing/bell housing.
Is this a good idea and will it work on a 2.3L?