"Replaced cap, rotor, points,
"Replaced cap, rotor, points, condenser, wires, plugs. Set points at 0.016". Set timing at 6 degrees BTDC, 900 rpm. Now it starts hard and when it does run it stalls after 10-15 seconds.
When I play with the timing, I can get it to start and stay running, but timing is set at 15 BTDC. Have tried 10 degrees BTDC, but it would not start the next day.
Should I leave it on 15 BTDC? Anything else to check or adjust?
This is a great motor and boat, usually enjoy it; lately not so happy.
Thanks for any help.
John"
"Replaced cap, rotor, points, condenser, wires, plugs. Set points at 0.016". Set timing at 6 degrees BTDC, 900 rpm. Now it starts hard and when it does run it stalls after 10-15 seconds.
When I play with the timing, I can get it to start and stay running, but timing is set at 15 BTDC. Have tried 10 degrees BTDC, but it would not start the next day.
Should I leave it on 15 BTDC? Anything else to check or adjust?
This is a great motor and boat, usually enjoy it; lately not so happy.
Thanks for any help.
John"