Logo
FULL SITE MENU

AQ125 oil change

J

jaxworks

Member
What is the easiet and less me

What is the easiet and less messy way to change the oil in these engines when they are down in that hole???
 
What I do with my aq125 is i h

What I do with my aq125 is i have a old steel round hubcap and i put that in the bilge and pull the oil plug. after draining i remove hubcap and pour it out. If you do not have a lot of room you can get a low profile container and drain it into there and buy a manual or electric pump to pump it out of the boat. I once tried to suck it out of the dipstick tube with an electric pump but i only could ever get a quart maybe two.good luck
 
"There kinda a pain, i used a

"There kinda a pain, i used a couple trash bags around the pan and caught most of it, until the bag ripped (dont use cheap bags) also the nut on the oil pan is huge, i think i had to use a 1" socket on it, as i couldnt find my 1" wrench."
 
Back
Top