"Hey guys and girls,
sorr
"Hey guys and girls,
sorry for making my first post a question but this problem is really bothering me and kept me from fishing this morning. Also, I did search but didn't seem to find anything that really seemed to relate to clearly to my situation. As the title says I have a '98 115 hp yamaha (it could be 97 or 99 if that really matters). Recently I had a tuneup done by a very reliable friend of mine he replaced the spark plugs and shift cables and besides the idle being set to high, which I adjusted the boat worked fine for a few trips. Then when I started it today the idle was too slow. I adjusted it back up but even after I did the boat will stall when placed in gear as though a rope is wrapped around the propeller. The prop spins freely when placed in neutral and it idles fine although it is a little harder to start than usual. I would ask the man who did the work but he is out of the country until the end of the week. Also, when revved the engine seems to run fine at higher speeds just not when placed in gear. Thanks for any and all help or ideas.
Peter"
sorr
"Hey guys and girls,
sorry for making my first post a question but this problem is really bothering me and kept me from fishing this morning. Also, I did search but didn't seem to find anything that really seemed to relate to clearly to my situation. As the title says I have a '98 115 hp yamaha (it could be 97 or 99 if that really matters). Recently I had a tuneup done by a very reliable friend of mine he replaced the spark plugs and shift cables and besides the idle being set to high, which I adjusted the boat worked fine for a few trips. Then when I started it today the idle was too slow. I adjusted it back up but even after I did the boat will stall when placed in gear as though a rope is wrapped around the propeller. The prop spins freely when placed in neutral and it idles fine although it is a little harder to start than usual. I would ask the man who did the work but he is out of the country until the end of the week. Also, when revved the engine seems to run fine at higher speeds just not when placed in gear. Thanks for any and all help or ideas.
Peter"