Logo

92 johnson 200 J200STLENS cuttting out

92 johnson

New member
Runs great at idle and lower speeds.
When I get to 3500-4000 Rpms it starts cutting out sometimes at little higher rpm depending on water conditions.
Removed the VRO pump and replaced fuel pump that did not help.
 
So I should probably do a Compression check to Rule out head or gasket issues?
Water pump ant thermostats are 3 years old but there is good water pressure when it's running.
Temp sensor is disconnected and grounded out due to unavailability not sure if that would have any like issues?
 
Back
Top