90 HP Evinrude- VRO to pump

[crewguy498]

I bought this boat, an 84 Cajun Blazer, with the original 90HP Evinrude. I bought the boat with VRO not being used so oil lines were plugged and the oil tank was removed. Now, years later, the VRO/ pump housing has started bubbling fuel from the top of the unit. I have been told that I could remove the VRO assembly and install a single fuel pump. Could someone assist me with a part number for that fuel pump, and where the pump would mount on this engine.

 

[racerone]

No model # posted ??----If it is a crossflow model then order a pump for a 1983 model V-4.----Or a later model 88 HP motor.-----The pump mounts directly to the intake manifold near the starter.---You will see the spot.--Clear and simple conversion.

 

[crewguy498]

no model # posted ??----if it is a crossflow model then order a pump for a 1983 model v-4.----or a later model 88 hp motor.-----the pump mounts directly to the intake manifold near the starter.---you will see the spot.--clear and simple conversion.

e90mlcrd

 

[racerone]

Modify as per post #2 ---Quite simple to do this.