CraigChism
New member
Help!
i acquired what I think is a 69 9.5 evinrude. Cleaned carb, new fuel pump, starts on 2/3 pulls. Runs fine. Water pump is working. However, I have a rather high pressure water spray from under the flywheel towards the pull start, I thought it was a bad ‘post’ exhaust water jacket gasket leak, took it apart and silicone gasket on the first 2 layers. But it’s still there. I can’t imagine it’s a cracked block since it isles smooth and revs fine in neutral. It fear it pulls normal. But there’s an awful lot of water spraying towards that recoil. Any ideas?????
i acquired what I think is a 69 9.5 evinrude. Cleaned carb, new fuel pump, starts on 2/3 pulls. Runs fine. Water pump is working. However, I have a rather high pressure water spray from under the flywheel towards the pull start, I thought it was a bad ‘post’ exhaust water jacket gasket leak, took it apart and silicone gasket on the first 2 layers. But it’s still there. I can’t imagine it’s a cracked block since it isles smooth and revs fine in neutral. It fear it pulls normal. But there’s an awful lot of water spraying towards that recoil. Any ideas?????