Logo

85 Evinrude 120

dhearn0513

Contributing Member
I replaced the water pump, and it was pumping fine 2 days ago on the muffs. but today its not pumping very much water at all. Also I was wanting to replace the thermostats and while taking the bolts off the housing 2 broke off flush, any idea how to get those out. I figure drilling them and retapping the threads is the only way at this point. The boat has been sitting for about 4 years.
 
Try to make a steel jig and secure in place with the 2 bolt holes left...get 4 new bolts. The jig will keep the drill from wandering and gouging the screw holes.
 
Back
Top