Logo
FULL SITE MENU

80 70 HP Johnson Tilt and Trim

B

BPaschall

Guest
I have a 80ish 70 HP (J70

I have a 80ish 70 HP (J70ELCSA) Johnson Sea Horse that does not have tilt and trim. I have recently seen a unit for sale on Ebay. How would I go about finding out what would fit my motor? Is there another site with this info? Thanks.
 
"Your engine would require tha

"Your engine would require that the transom brackets (the brackets that bolt to the boat) have three mounting holes in each one to attach the PTT assy. The unit would need to be the one that has a tilt cylinder in the middle of it with a trim ram located to each side of that tilt cylinder.

There are some engines that will not accept the PTT assy. If possible, (via e-mail, send me a close up picture of your engine at the transom bracket areas. In turn, I could send you a picture of the PTT assy. [email protected]

Your engine is a 1980 70hp model.

Joe (30+ Years With OMC)"
 
Back
Top