Logo
FULL SITE MENU

69 Merc 1000 Thunderbolt distributor removal

K

keesanka

New member
"I'm trying to remove the

"I'm trying to remove the entire distributor from the powerhead. I have everything disconnected except at the top where the distributor pully is encompased. I have removed the cover plate from the distributor pully top...So what now...? My crappy Seloc manual is not covering this part.. All it states is to "work the pully,key,and spacer from the distributor shaft"}}...no diagrams... nothing. I'm stumped. Can anyone give me some advice..?"
 
"Joe,

The pulley should jus

"Joe,

The pulley should just slide off the shaft after removing the bolt and pulley cover. It might need a little prying. Remove the keyway and spacer. There are three nuts, bolts and washers that hold the distributot housing to the block.


Tony"
 
"Joe,

You should be able to

"Joe,

You should be able to remove the distributor with the keyway and spacer on the shaft if you need to.

Tony"
 
Back
Top