Logo
FULL SITE MENU

68 Rude 33 Point settings/ Points won't open up to .20

A

April Kelley

New member
Hey Guys I need some more help. I have aligned the key way with my points, Per Joe, one set will open an adjust to .20. The other set will not open far enough to set points at .20. What am I doing wrong or what could be my problem? Any help would be great.
Thanks much.
Popsrose/Antique Fisherman
 
You are turning the little cam screw to adjust the points I hope.---Setting is 0.020" not your .20 there is a huge difference.
 
Then you are doing something wrong !------Are you using the small cam screw in the slot ???--------------Maybe the cam screw is bottoming out ( tight ) and needs to be turned out one turn !!
 
Last edited:
Thanks Racerone, That is what was happening. Cam screw was at bottom. Backed it out half turn and now works fine. May your sails be full. Take care.
Popsrose/Antique fisherman.
 
Amazing results when you follow topnotch advice----------------" Thanks anyway "-----------------What does that comment mean ??
 
Back
Top