57 GSi bellhousing bearing removal

[txsnowmobiler]

"DP-SM 1.95 Stern Drive

Ave

"DP-SM 1.95 Stern Drive

Average mechanic needs help!! U-joint noise on lake, ran with noise for approximately 1 hour. Found cracked bellhousing bellows. Removed clamp...cup of water poured out...u-joints rust color (film). Removed stern drive, removed bellows and bearing and seal look like they need replacement.

Other than a 3 jaw bearing puller, are there any other special tools needed to remove and replace the bearing? Does the bearing come out aft or inboard (eng require removal)?

Any assistance would be greatly appreciated!!"

 

[el_pescador]

What year is your engine and d

What year is your engine and drive?

 

[txsnowmobiler]

"2000 Cobalt 206. Original en

"2000 Cobalt 206. Original engine and drive. Here's a picture of the bearing...

bearing

 

[scott_s]

comes out the back. 3 jaw will

comes out the back. 3 jaw will work. you will need an alignment tool. also replace u-joints.