40hp Big Twin missing wiring harness

[MrPhishfercat]

I need the wire harness ( 7 pin square plug ) for my Johnson 40hp Big Twin, i have been trying to upload pics, unsuccessfully. Any help would be appreciated.

 

[kimcrwbr1]

What is the model number?

 

[MrPhishfercat]

I will check when I get home this afternoon

 

[MrPhishfercat]

Rds-22

 

[kimcrwbr1]

I have the short harness from the motor to the j box. What is the problem you are having? Get a photobucket account and upload pics there and link them here.

 

[kimcrwbr1]

BTW that is a johnson model number it sounds like it has the evinrude motor cover?

 

[MrPhishfercat]

http://s826.photobucket.com/user/1jwillyg11/media/IMG_3019.jpg.html?o=0
[url]http://i826.photobucket.com/albums/zz187/1jwillyg11/IMG_3016.png





[/URL]

 

[MrPhishfercat]

http://s826.photobucket.com/user/1jwillyg11/media/IMG_2909.jpg.html?sort=3&o=5

 

[kimcrwbr1]

http://www.ebay.com/itm/USED-1960-J...ash=item3f73ed7b09:g:1QQAAOSwt5hYgOex&vxp=mtr
RDS-22 is a 1960 super sea horse

 

[MrPhishfercat]

If I had the short harness (with the plugs) from the motor to the J-Box , I could wire up to the console, I have a book with the wiring diagram.

 

[kimcrwbr1]

It is hard to say what is going on there the control box is for a electric shift as well as the junction box. You will need a dual handle shift and cables for that engine and the harnesses from the engine to the junction box and the cable up to the dash board. I have everything you would need to make it work that junction box is also for the electric shift with a generator I believe. Where are you located? Without the proper parts you have alot of work and research to get it running.
This shows the wiring for that motor on the boat you can get it running with that J box. Do you have the cable that goes up to the dash?

 

[kimcrwbr1]

Make me an offer PM me

 

[kimcrwbr1]

http://www.marineengine.com/parts/j...cturer=Johnson&section=Electric+Starter+Group
Oops forgot the link

 

[MrPhishfercat]

I am in Eaton Rapids , MI.............S this J-box and controls are not for this motor,

 

[kimcrwbr1]

That J-box and controls are for a 75hp electric shift the control box is worth some money if the shift switch is in good condition.