2006 9.9MSH part help!

[Michael09]

Hey guys, I have a 2006 Yamaha 9.9MSH 2-stroke outboard. I recently just finished cleaning the carburetor, and while I was mounting it back onto the motor I ran into a problem. I over torqued one of the two bolts that are used to mount the carburetor onto the engine and it snapped. I was able to get both ends out but now I need a new bolt and I can't find one anywhere! The bolt is threaded at about quarter on the end and smooth the rest of the way. On the top it has either a 6 or a 9. I hope someone can help me out and find another one! Thanks guys!

 

[racerone]

boats.net-------- has a listing of all the parts.---------Your local hardware store may have a selection of metric bolts that will do the trick as well.

 

[Michael09]

I've searched this site and they do not have the mounting bolt. Im going to the hardware store now! Thanks!

 

[racerone]

Just takes a few clicks on ---boats.net -------all the parts and part #'s are there.----Nothing to it.

 

[Joshua770]

McMaster should have it

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

 

[racerone]

Likely resolves 12 years ago.

 

[boscoe]

Likely resolves 12 years ago.

How do folks even come across 12 year old posts?

 

[racerone]

By a google search I think.