I was hoping someone could hel
I was hoping someone could help me figure out why my motor will no longer start. I had an issue with water in the fuel and have corrected that but now the engine does not have any spark? I am thinking that there may be a sensor somewhere on the engine that shuts it off when water is detected but have no idea how it is reset. I do not have the digital gauges so I am guessing at what the problem is. I did replace the external water separator and am getting good fuel flow through the onboard separator. I removed all spark plugs and get a healthy mist of fuel when cranking the engine but do not see any spark? I suppose a service manual would be helpful but I only have the owners manual. Any suggestions would be greatly appreciated.
I was hoping someone could help me figure out why my motor will no longer start. I had an issue with water in the fuel and have corrected that but now the engine does not have any spark? I am thinking that there may be a sensor somewhere on the engine that shuts it off when water is detected but have no idea how it is reset. I do not have the digital gauges so I am guessing at what the problem is. I did replace the external water separator and am getting good fuel flow through the onboard separator. I removed all spark plugs and get a healthy mist of fuel when cranking the engine but do not see any spark? I suppose a service manual would be helpful but I only have the owners manual. Any suggestions would be greatly appreciated.