Logo

2001 70hp johnson-no spark

I suggest that you primarily start from the basics. Check kill cord is in place. Is there any loose or cut wire. My 150hp had the same problem and found that one if the wires was corroded from inside ending up with no spark
 
Check the wire under the flywheel to the stator.
these engines often get the wires cut through jus ere you cant get to them.
seen it on 2 x . evinrude's . I was luck enough to be able to repair mine with epoxy on the plastic joint.
The way the wire has to bend is terrible, its a accident waiting to happen.
this happens mainly with1995 year onwards with the3 cylinder 50,60and 70p (all he same flywheels)
 
Back
Top