When I put my boat up for the winter, I ran storage seal thru it and fogged the carburetor. Everything worked just fine. Now, when I try to start the motor on a freshly charged battery, all I get is one click. The motor does not turn over. I replaced the slave solenoid, tried a brand new battery, but no change. The starter looks like a pain in the butt to change out, so thought I would check for any other ideas. If it is the starter, does anyone have step-by-step instructions for remove and replace of the starter? It is in a Maxum with a bench seat in the back, so access is very limited.
Thanks for any advice you can provide!
Thanks for any advice you can provide!