1999 ficht 150

[Firedog144]

My 150 hp does not want to stay running, almost like pulling the plug out on a electrical plug in the wall. If I move wires around or put pressure on the emm it corrects itself? Stumped here.

 

[kevinj]

Definitely sounds like a short in the harness or the EMM itself. You may need to send off the EMM to have it evaluated and repaired.

http://dfitechnologies.com/products-and-services

 

[gotsea]

Unplug the harness from the emm and make sure all the pins are in place and there is no corrosion, clean, apply some electrical tune up grease and reconnect, do not tamper with the emm I am not sure does can be repair

 

[Boobie]

Are you playing anywhere near the PDP ?

 

[Firedog144]

I checked the pins and they were clear of any crud, ground was clear also of corrosion, What's the PDP?

 

[Boobie]

Power distribution panel. Been known to have problems with loose connections.

 

[Firedog144]

Ok thnx will check!

 

[Boobie]

What happened ??

 

[johnnygjr]

wer'e waiting