1998 johnson 225 looper new rebuild

[pocket]

On a rebuilt engine with less than 10 minutes run time @ 1500 RPMS (per manual) all the cylinders range from 95 to 105psi and one hole has 85psi. I pulled the head off and looked at the cylinder, hone marks still look great no scaring what so ever...should I finish the break in or should I pull the piston and check the rings?

 

[Boobie]

Run it and check it after 10 hrs break in time. 10 mins don't tell you anything.

 

[pocket]

Thanks Alot!!! Wasn't sure which direction to go.....its been 15 years since I tore into an outboard...kinda forgot the few things I thought I knew..