Logo
FULL SITE MENU

1997 MARINER 200 25L

K

kencraft21

New member
"I hope that someone can help

"I hope that someone can help me with this, I removed the oil injection from this motor, how can i stop the oil alarm and keep the temp alarm? thanks for any help!"
 
"I assume you left the oil tan

"I assume you left the oil tank in place under the cowl (?). If so, simply disconnect the oil sensor (two wires with bullet connectors at the base of the oil resevoir)."
 
"i have taken the oil tank, oi

"i have taken the oil tank, oil pump off. by disconnecting the two wires the oil alarm goes off, if i would take the waring box off the motor will i still have temp alarm"
 
"No, but if it's going off

"No, but if it's going off with the oil sensor disconnected it sounds like you have a bad alarm.

You getting a steady beep or intermittent??"
 
"Check the leads going to the

"Check the leads going to the alarm itself (what was left when you disconnected the tank).

Those should be isolated from each other, and make sure the covering is intact.

One of those may simply be grounding to the block which would complete the circuit making the alarm "think" that you are out of oil..."
 
Back
Top