Logo

1994 50hp Evinrude wonbt start

caseysmydog

New member
Turns over strong...from post

Turns over strong...from post coming from coil their is no reading (either post) with ignition key on and motor turning.
Is it the coil on maybe something else?
Thanks
 
I don't know what to say e

I don't know what to say except there appears to be no voltage leaving the coil to go to the 2 spark plugs. When I measured for voltage at the two posts leaving the coil going to the plugs there was none.
I don't know then if its the coil or something called the rectifier or the power pack.
Any info may help Thanks
 
Back
Top